ProductOverview: Fibaro Wall Plug, with power metering feature, is an intelligent, ultimate plug play, most sophisticated, extremely compact, remotely controlled outlet adapter. This highly functional wall plug can be applied wherever there's a need to control electrical devices of maximum 2,5 kW power output, while monitoring power consumption in a convenient and maintenance-free way. Crystal LED ring informs about the current load of the connected appliance by visually changing its colour. ProductHighlights: Current and historical power consumption measuring, Power consumption level visualisation with the use of crystal, colour changing, LED ring, Controlled through other Fibaro devices or any Z-Wave controller, Microprocessor controlled, Smallest device of the type in the world. TechnicalData: Power Source 110 - 230 V AC 10% 50/60Hz, Rated operational output voltage: 11A/230V AC 50/60Hz - continuous load, Power consumption: up to 0,8W, Output power for resistive loads: 2,5 kW continuous load, In accordance with UE standards: EN 55015 (noise), EN 60669-2-1 (operational safety) Circuit temperature limit: 105 C, Operational temperature: 0 - 40 C, For use with sockets (Compatible with each EU plug: CEE 7/16 - max load. 2,5A; CEE 7/17 - max load 16A; and dual type plugs E/F), Radio protocol: Z-Wave, Radio frequency: 868,4 MHz EU, Antenna range: up to 50 m outdoors / up to 30 m indoors (depending on building materials), Dimensions (D x H): 43 x 65 mm.

ProductOverview: Radio controlled light dimming module, designed to work with light sources of any type. May be connected to two-wire or three-wire cable. Fibaro Dimmer can switch or dim connected litght source either through radio waves or through the wall switch connected directly to it. Automatically senses connected device, features automatic overload protection switch-off and soft start function. Works as a dimmer or as a connector, with two-wire or three-wire cables. In case of old type fluorescent light sources or old type transformers, only on/off function may be possible. ProductHighlights: As a dimmer, works with: Conventional fluorescent lamps, 230V operated halogen lamps, 12V operated halogen lamps, Dimmable LED lamps, Using Bypass FGB001, with any dimmable light source up to 500W. As a connector, works with: Compact fluorescent lights, LED lamps, Old type fluorescent lamps. Our Dimmer is the smallest device of the type in the World! TechnicalData: Power source 230V +/-10%, 50Hz, Output power 25-500W (resistive loads only)*, Conforms to UE requlations:EN55022 (radio wave interference), EN61000-6 (safety of use), Surge protection: 2,5A, Overheating protection: safety off at 105oC, Ambient temperature: 10oC - 40oC, To be mounted in standard wall switch boxes 50mm, Radio protocol: Z-Wave, Radio Frequency 868,4 MHz EU; 908,4 MHz US; 921,4 MHz ANZ; 869,2 MHz RU, Antenna range: up to ca. 50 meters outdoor, or up to 30 meters inside (depends on building structure), Outside dimmensions (L x W x H) 42mm x 36mm x 15mm.

ProductOverview: Fibaro Wall Plug, with power metering feature, is an intelligent, ultimate plug play, most sophisticated, extremely compact, remotely controlled outlet adapter. This highly functional wall plug can be applied wherever there's a need to control electrical devices of maximum 2,5 kW power output, while monitoring power consumption in a convenient and maintenance-free way. Crystal LED ring informs about the current load of the connected appliance by visually changing its colour. ProductHighlights: Current and historical power consumption measuring, Power consumption level visualisation with the use of crystal, colour changing, LED ring, Controlled through other Fibaro devices or any Z-Wave controller, Microprocessor controlled, Smallest device of the type in the world. TechnicalData: Power Source 110 - 230 V AC 10% 50/60Hz, Rated operational output voltage: 11A/230V AC 50/60Hz - continuous load, Power consumption: up to 0,8W, Output power for resistive loads: 2,5 kW continuous load, In accordance with UE standards: EN 55015 (noise), EN 60669-2-1 (operational safety) Circuit temperature limit: 105 C, Operational temperature: 0 - 40 C, For use with sockets (Compatible with each EU plug: CEE 7/16 - max load. 2,5A; CEE 7/17 - max load 16A; and dual type plugs E/F), Radio protocol: Z-Wave, Radio frequency: 868,4 MHz EU, Antenna range: up to 50 m outdoors / up to 30 m indoors (depending on building materials), Dimensions (D x H): 43 x 65 mm.

This kit includes: Home center 2 lite 2 Wallplugs 1 Motion control Door sensor

ProductOverview: Universal, Z-Wave compatible RGB / RGBW controller. Fibaro RGBW Controller may control LED strips, RGB / RGBW LEDs and 12V - 24V powered light sources. In addition the device supports up to four, 0V - 10V analogue sensors, such as temperature sensors, humidity sensors, wind sensors, air quality sensors, light sensors etc. All IN and OUT terminals may be user configured for LED control or 0V-10V signal readouts. May be used as a dimmer with Halogen lamps. ProductHighlights: Current and historical power consumption measuring Controlled through other Fibaro devices or any Z-Wave controller, Microprocessor controlled, Most advanced device of this type in the World. TechnicalData: Power source: 12V DC / 24V DC, Rated output power: combined 12A (sum of all connected outputs), Max load (e.g. Halogen lamps) at 12V - 144W combined, at 24V - 288W combined. Power consumption: 0,3W, Radio frequency: 868,4 MHz EU; 908,4 MHz US; 921,4 MHz ANZ; 869,2 MHz RU, Antenna range: up to ca. 50 meters outdoor, or up to 30 meters inside (depends on building structure), Outside dimmensions (L x W x H) 42mm x 36mm x 15mm.

ProductOverview: Radio controlled Fibaro Double On/Off Relay Switch is designed to be installed in standard wall switch boxes, or anywhere else where it is necessary to operate two independent devices of 1,5kW combined power output. Fibaro Double On/Off Relay Switch can switch on or off connected devices either through radio waves or through the wall switch connected directly to ProductHighlights: Controlled through other Fibaro devices or any Z-Wave controller Microprocessor controlled, Our ON/OFF Relay Switch is the smallest device of the type in the World! TechnicalData: Power Source 110V - 230V +/-10% 50/60Hz, Max. single AC output: 8A / 230V 50/60Hz, Max. single DC output: 8A / 30V, Max. combined power output (resistive loads only) - 2 x 1,5 kW (in case of loads other than resistive it may be necessary to connect lower output in order to protect the Switch from damage), Conforms to UE requlations:EN55022 (radio wave interference), EN61000-6 (safety of use), Overheating protection: safety off at 105oC, Ambient temperature: 10oC - 40oC, To be mounted in standard wall switch boxes 50mm, Radio protocol: Z-Wave, Radio Frequency 868,4 MHz EU; 908,4 MHz US; 921,4 MHz ANZ; 869,2 MHz RU, Antenna range: up to ca. 50 meters outdoor, or up to 30 meters inside (depends on building structure), Outside dimmensions (L x W x H) 42mm x 36mm x 15mm.

ProductHighlights: Extremely efficient hardware architecture = fastest device of the type in the World, Ultra low energy consumption, Remote access via web page or mobile phone, Simple, user friendly interface, Fast and simple configuration, Geo localization - tracking Your family members, SMS notification, Manageable users' rights, Various devices' associations, Conditioning scenes depending on weather or other, user-defined variables, Advanced recovery system, System backup is always saved on attached pen drive, hidden in the casing, History of events. TechnicalSpecification lntel Atom 1,6Ghz Processor Thanks to it's efficiency, Home Center 2 is much, much faster than other Z-Wave gateways, currently available in the World. 1GB RAM, 2GB SLC Hard Drive Large memory + fast processor = quick communication between Fibaro System devices. Hardware architecture used in Home Center 2 makes Z-Wave based home automation system work much faster then ever. 4GB MLC Recovery Disc Significantly improved user safety thanks to Fibar Group own approach to data protection. Each Home Center 2 has its' own Recovery disc, holding system backup, unique to each gateway. This closes each system completely from unauthorized access. Other advantage of this solution is quick and simple system healing after any failure.

ProductOverview: Fibaro Flood Sensor is a universal, Z-Wave compatible, flood and temperature sensor. Device can be battery or VDC powered (12 or 24 VDC). Flood alarm is sent to the Z-Wave network devices or additionally to any alarm system controller, through opening a NC contact. The device has built in temperature sensor, monitoring temperature of e.g. floor. Fibaro Flood Sensor is designed to be placed on the floor or on a wall with a flood sensors probe extended by connected wire. The device has built in LED and sound alarm. ln addtion, the sensor is equ- ipped with a tilt sensor reporting tilt or movement to the main controller e.g. when the Sensor has been taken by someone from it's original location. LED diode signals flood, operating mode or the Z-Wave network communication range. Fibaro Flood Sensor is sink-resistant, drifts on the water sufrace and keeps on sending alarm signal in case of substantial inundation. ProductHighlights: Unique, floating design Detects flooding or fire Battery or VDC powered Communicates with a Z-Wave network or a wired alarm system Features wireless software update. TechnicalData: Power Supply: 12 - 24 VDC Battery Type: CR123A Power Consumption (at VDC operation): 0,4W Output terminals maximum current carrying capacity (ALARM NC, TAMP NC): 25mA Maximum voltage at output terminals: 40V (AC or DC) EU standards compliance: EMC 2004/108/EC, R TTE 199/5/WE Radio protocol: Z-Wave Radio frequency: 868,4 MHz EU; 908,4 MHz US; 921,4 MHz ANZ; 869,2 MHz RU; Range: up to 50m outdoors, up to 30m indoors (depending on terrain and building structure) Operational Temperature: 0oC - 40oC Measured temperature range: -20oC - 100oC Temperature measuring accuracy: 0,5oC (within 0oC- 40oC range) Dimensions (Diameter x Height): 72 mm x 28 mm

ProductOverview: Radio controlled module, designed to work with electric motors in blinds, rollers, canopies and such. Fibaro Blind/Roller Shutter can steer connected device either through radio waves or through the wall switch, connected directly to it. Equipped with unique feature of monitoring current Roller/Blind position. ProductHighlights: Controlled through other Fibaro devices or any Z-Wave controller Microprocessor controlled, Our Blind/Roller Shutter is the smallest device of the type in the World! TechnicalData: Power Source 110V - 230V +/-10% 50/60Hz, Output power up to 1kW, Conforms to UE requlations:EN55022 (radio wave interference), EN61000-6 (safety of use), Overheating protection: safety off at 105oC, Ambient temperature: 10oC - 40oC, To be mounted in standard wall switch boxes fi :250mm, Radio protocol: Z-Wave, Radio Frequency 868,4 MHz EU; 908,4 MHz US; 921,4 MHz ANZ; 869,2 MHz RU, Antenna range: up to ca. 50 meters outdoor, or up to 30 meters inside (depends on buil- ding structure), Outside dimmensions (L x W x H) 42mm x 36mm x 15mm.

ProductOverview: Bypass Fibaro is a device complementary to Fibaro Dimmer FGD211. Its installation makes possible to dim light sources with minimum power consumption, such as e.g. single 0,5Watt LED. Please note it is possible to dim only light sources clearly marked as dimmable. ProductHighlights: Power source: 230V +/-10% 50Hz Overheating protection: safety off at 105oC, To be mounted in standard, wall switch boxes 50 mm, Outside dimmensions (L x W x H) - 17mm x 18mm x 8,3mm.