FLATFIX FUSION BASE PROFILE 370 MM

TriSole at a glance Triangular mounting system for flat-roofs, including those of corrugated and trapezoid sheet metal. Suitable for nearly all normal and particularly oversized framed PV-modules Variable mounting system for module frame heights of 30-50mm Durable components made of high-grade aluminium and stainless steel Alternative system for flat-roof mounting The TriSole system is ideal for installing solar systems on flat-roofs of corrugated and trapezoidal sheet or for mounting oversized framed PV-modules. The TriSole triangular mounting system is either fastened directly onto the north-south or east-west rails or heavy duty panels or attached to the corrugated or trapezoidal sheet roofs using hanger bolts. Many system parts are pre-assembled at factory and the other components are installed by simply sliding and clicking them on. The elevated mounting is possible on an installation width of up to 10 meters. The TriSole components are also widely used with the field proven VarioSole system from Renusol and stand for simple, fast and secure assembly. Price for 1 Triangle (rails etc. are to be ordered separately)

RENCON+ - Renusol Console +

If your are looking for the optimal solution for medium to large sized PV systems on flat surfaces, this system will convince you. The unique mark of the ConSole+ is the use of ballasting through the weight of gravel, quarry tiles or similar material, so that the roofing or the underground remain intact. This results in very easy planning, extremely short mounting times, and secure support. ConSole+ is made of 100% chlorine-free polyethylene, which gives the robust system longevity. At the same time, the slight weight and the stackable shape offer great advantages for logistics and warehousing and during installation. ConSole+ is stable and durable and stands out through especially easy handling. Flat-roof mounting, without anchoring, without damaging the roofing Also suitable for ground mounted installations Especially for landfills, rocky undergrounds and conversion sites Available for most sizes of solar modules Aerodynamic version support angle at 15 with wind deflector Free positioning of the modules Optimal load distribution without concentrated loads Complies with fire prevention measures according to DIN EN 13501-1:2010-01 class E Low product weight, depending on type between 7.9 and 9.9 kg Optimised packing units for trade and industry (up to 80 pieces per pallet)

RENMETASOLEADAPTER - Renusol Metasole adapter corrugated sheet radius 24

With a mounting time of less than 10 minutes per kWp and a weight below 1.3 kg per kWp, MetaSole sets new standards for the installation of PV systems on trapezoidal metal sheet roofs made of steel and aluminium sheet. The compact system allows the quick installation of framed PV modules on trapezoidal sheet metal roofs and corrugated iron roofs. For direct mounting of the modules only four different components are required: a weight-optimized clamping foot, two specially coated thin sheet metal screws, one terminal and one middle clamp. The screw with material displacing tip saves the pre-drilling, this results in an extremely short installation time. The low volume, the elimination of mounting rails, the few components and reduce to the absolute minimum lead to very low investment costs of purchase. System features For roofs with trapezoidal and corrugated sheet metal A few assembly components, no mounting rail Waterproof design by clamping feet with pre-installed EPDM rubber Tightness test UB 5.1 / 10-535 MFPA Installation features Quick and easy to assemble in less than 10 minutes per kWp Extremely lightweight at only 1.3 kg weight per kWp Extremely easy to transport with all the parts for 5 kWp in a shoebox Mounting screws without pre-drilling by using material displacing top No drilling template needed Variable height module terminals for module frame heights of 30-50 mm Plant design online by Renusol project configurator or special questions / roof features via application technology: Tel +49 221 788707-29

RENMETASOLE - Renusol Metasole 0,75mm

With a mounting time of less than 10 minutes per kWp and a weight below 1.3 kg per kWp, MetaSole sets new standards for the installation of PV systems on trapezoidal metal sheet roofs made of steel and aluminium sheet. The compact system allows the quick installation of framed PV modules on trapezoidal sheet metal roofs and corrugated iron roofs. For direct mounting of the modules only four different components are required: a weight-optimized clamping foot, two specially coated thin sheet metal screws, one terminal and one middle clamp. The screw with material displacing tip saves the pre-drilling, this results in an extremely short installation time. The low volume, the elimination of mounting rails, the few components and reduce to the absolute minimum lead to very low investment costs of purchase. System features For roofs with trapezoidal and corrugated sheet metal A few assembly components, no mounting rail Waterproof design by clamping feet with pre-installed EPDM rubber Tightness test UB 5.1 / 10-535 MFPA Installation features Quick and easy to assemble in less than 10 minutes per kWp Extremely lightweight at only 1.3 kg weight per kWp Extremely easy to transport with all the parts for 5 kWp in a shoebox Mounting screws without pre-drilling by using material displacing top No drilling template needed Variable height module terminals for module frame heights of 30-50 mm Plant design online by Renusol project configurator or special questions / roof features via application technology: Tel +49 221 788707-29

RENRIBROOF - Renusol ribroof clamp 465

If your are looking for the optimal solution for medium to large sized PV systems on flat surfaces, this system will convince you. The unique mark of the ConSole+ is the use of ballasting through the weight of gravel, quarry tiles or similar material, so that the roofing or the underground remain intact. This results in very easy planning, extremely short mounting times, and secure support. ConSole+ is made of 100% chlorine-free polyethylene, which gives the robust system longevity. At the same time, the slight weight and the stackable shape offer great advantages for logistics and warehousing and during installation. ConSole+ is stable and durable and stands out through especially easy handling. Flat-roof mounting, without anchoring, without damaging the roofing Also suitable for ground mounted installations Especially for landfills, rocky undergrounds and conversion sites Available for most sizes of solar modules Aerodynamic version support angle at 15 with wind deflector Free positioning of the modules Optimal load distribution without concentrated loads Complies with fire prevention measures according to DIN EN 13501-1:2010-01 class E Low product weight, depending on type between 7.9 and 9.9 kg Optimised packing units for trade and industry (up to 80 pieces per pallet)

RENRS1ALU - Renusol RS1 end/middle clamp alu

VarioSole at a glance Removing of the roofing not required Suited for all roofing types Few system components Patented height adjustable Moduleclamps Ideally suited for levelling height irregularities Preassembled mounting components The flexible and light on-roof system for pitched roofs The VarioSole is suited for all roofing types, all current PV modules and, thanks to height-adjustable mounting elements, even for roof areas that are not level. The installation of the few, partially already pre-assembled components is easy and fast. VarioSole is a rail system that is mounted on the rafters with special roof hooks. All that is usually necessary for the installation is to remove or slide up single tiles. Removing the entire roof covering is therefore not required. Roofhooks for all roofings The roof hooks are made of extremely resilient, yet at the same time light aluminium diecast. Due to their design, the roof hooks are especially rigid and stable. The rails that then fasten the modules in place with module clamps are mounted on these hooks.

RENRS1BLACK - Renusol RS1 end/middle clamp black

VarioSole at a glance Removing of the roofing not required Suited for all roofing types Few system components Patented height adjustable Moduleclamps Ideally suited for levelling height irregularities Preassembled mounting components The flexible and light on-roof system for pitched roofs The VarioSole is suited for all roofing types, all current PV modules and, thanks to height-adjustable mounting elements, even for roof areas that are not level. The installation of the few, partially already pre-assembled components is easy and fast. VarioSole is a rail system that is mounted on the rafters with special roof hooks. All that is usually necessary for the installation is to remove or slide up single tiles. Removing the entire roof covering is therefore not required. Roofhooks for all roofings The roof hooks are made of extremely resilient, yet at the same time light aluminium diecast. Due to their design, the roof hooks are especially rigid and stable. The rails that then fasten the modules in place with module clamps are mounted on these hooks.

RENTRI1015 - Renusol Trisole adjustable triangular mounting system 10-15

TriSole at a glance Triangular mounting system for flat-roofs, including those of corrugated and trapezoid sheet metal. Suitable for nearly all normal and particularly oversized framed PV-modules Variable mounting system for module frame heights of 30-50mm Durable components made of high-grade aluminium and stainless steel Alternative system for flat-roof mounting The TriSole system is ideal for installing solar systems on flat-roofs of corrugated and trapezoidal sheet or for mounting oversized framed PV-modules. The TriSole triangular mounting system is either fastened directly onto the north-south or east-west rails or heavy duty panels or attached to the corrugated or trapezoidal sheet roofs using hanger bolts. Many system parts are pre-assembled at factory and the other components are installed by simply sliding and clicking them on. The elevated mounting is possible on an installation width of up to 10 meters. The TriSole components are also widely used with the field proven VarioSole system from Renusol and stand for simple, fast and secure assembly. Price for 1 Triangle (rails etc. are to be ordered separately)

RENTRI2030 - Renusol Trisole support triangular mounting system 20-30

TriSole at a glance Triangular mounting system for flat-roofs, including those of corrugated and trapezoid sheet metal. Suitable for nearly all normal and particularly oversized framed PV-modules Variable mounting system for module frame heights of 30-50mm Durable components made of high-grade aluminium and stainless steel Alternative system for flat-roof mounting The TriSole system is ideal for installing solar systems on flat-roofs of corrugated and trapezoidal sheet or for mounting oversized framed PV-modules. The TriSole triangular mounting system is either fastened directly onto the north-south or east-west rails or heavy duty panels or attached to the corrugated or trapezoidal sheet roofs using hanger bolts. Many system parts are pre-assembled at factory and the other components are installed by simply sliding and clicking them on. The elevated mounting is possible on an installation width of up to 10 meters. The TriSole components are also widely used with the field proven VarioSole system from Renusol and stand for simple, fast and secure assembly. Price for 1 Triangle (rails etc. are to be ordered separately)

RENUSOL FS10-S 1389MM

VarioSole at a glance Removing of the roofing not required Suited for all roofing types Few system components Patented height adjustable Moduleclamps Ideally suited for levelling height irregularities Preassembled mounting components The flexible and light on-roof system for pitched roofs The VarioSole is suited for all roofing types, all current PV modules and, thanks to height-adjustable mounting elements, even for roof areas that are not level. The installation of the few, partially already pre-assembled components is easy and fast. VarioSole is a rail system that is mounted on the rafters with special roof hooks. All that is usually necessary for the installation is to remove or slide up single tiles. Removing the entire roof covering is therefore not required. Roofhooks for all roofings The roof hooks are made of extremely resilient, yet at the same time light aluminium diecast. Due to their design, the roof hooks are especially rigid and stable. The rails that then fasten the modules in place with module clamps are mounted on these hooks.

Renusol Ms+ portrait rivet

With a mounting time of less than 10 minutes per kWp and a weight below 1.3 kg per kWp, MetaSole sets new standards for the installation of PV systems on trapezoidal metal sheet roofs made of steel and aluminium sheet. The compact system allows the quick installation of framed PV modules on trapezoidal sheet metal roofs and corrugated iron roofs. For direct mounting of the modules only four different components are required: a weight-optimized clamping foot, two specially coated thin sheet metal screws, one terminal and one middle clamp. The screw with material displacing tip saves the pre-drilling, this results in an extremely short installation time. The low volume, the elimination of mounting rails, the few components and reduce to the absolute minimum lead to very low investment costs of purchase. System features For roofs with trapezoidal and corrugated sheet metal A few assembly components, no mounting rail Waterproof design by clamping feet with pre-installed EPDM rubber Tightness test UB 5.1 / 10-535 MFPA Installation features Quick and easy to assemble in less than 10 minutes per kWp Extremely lightweight at only 1.3 kg weight per kWp Extremely easy to transport with all the parts for 5 kWp in a shoebox Mounting screws without pre-drilling by using material displacing top No drilling template needed Variable height module terminals for module frame heights of 30-50 mm Plant design online by Renusol project configurator or special questions / roof features via application technology: Tel +49 221 788707-29

RENVARBOUT10X195 - Renusol Variosole hanger bolt steel

VarioSole at a glance Removing of the roofing not required Suited for all roofing types Few system components Patented height adjustable Moduleclamps Ideally suited for levelling height irregularities Preassembled mounting components The flexible and light on-roof system for pitched roofs The VarioSole is suited for all roofing types, all current PV modules and, thanks to height-adjustable mounting elements, even for roof areas that are not level. The installation of the few, partially already pre-assembled components is easy and fast. VarioSole is a rail system that is mounted on the rafters with special roof hooks. All that is usually necessary for the installation is to remove or slide up single tiles. Removing the entire roof covering is therefore not required. Roofhooks for all roofings The roof hooks are made of extremely resilient, yet at the same time light aluminium diecast. Due to their design, the roof hooks are especially rigid and stable. The rails that then fasten the modules in place with module clamps are mounted on these hooks.

RENVARBOUT10X200 - Renusole Variosole hanger bolt for wood

VarioSole at a glance Removing of the roofing not required Suited for all roofing types Few system components Patented height adjustable Moduleclamps Ideally suited for levelling height irregularities Preassembled mounting components The flexible and light on-roof system for pitched roofs The VarioSole is suited for all roofing types, all current PV modules and, thanks to height-adjustable mounting elements, even for roof areas that are not level. The installation of the few, partially already pre-assembled components is easy and fast. VarioSole is a rail system that is mounted on the rafters with special roof hooks. All that is usually necessary for the installation is to remove or slide up single tiles. Removing the entire roof covering is therefore not required. Roofhooks for all roofings The roof hooks are made of extremely resilient, yet at the same time light aluminium diecast. Due to their design, the roof hooks are especially rigid and stable. The rails that then fasten the modules in place with module clamps are mounted on these hooks.

RENVARBOUT12X250 - Renusol Variosole hanger bolt wood

VarioSole at a glance Removing of the roofing not required Suited for all roofing types Few system components Patented height adjustable Moduleclamps Ideally suited for levelling height irregularities Preassembled mounting components The flexible and light on-roof system for pitched roofs The VarioSole is suited for all roofing types, all current PV modules and, thanks to height-adjustable mounting elements, even for roof areas that are not level. The installation of the few, partially already pre-assembled components is easy and fast. VarioSole is a rail system that is mounted on the rafters with special roof hooks. All that is usually necessary for the installation is to remove or slide up single tiles. Removing the entire roof covering is therefore not required. Roofhooks for all roofings The roof hooks are made of extremely resilient, yet at the same time light aluminium diecast. Due to their design, the roof hooks are especially rigid and stable. The rails that then fasten the modules in place with module clamps are mounted on these hooks.

RENVARBRORINL - Roof hook stainless steel on-roof insulation

VarioSole at a glance Removing of the roofing not required Suited for all roofing types Few system components Patented height adjustable Moduleclamps Ideally suited for levelling height irregularities Preassembled mounting components The flexible and light on-roof system for pitched roofs The VarioSole is suited for all roofing types, all current PV modules and, thanks to height-adjustable mounting elements, even for roof areas that are not level. The installation of the few, partially already pre-assembled components is easy and fast. VarioSole is a rail system that is mounted on the rafters with special roof hooks. All that is usually necessary for the installation is to remove or slide up single tiles. Removing the entire roof covering is therefore not required. Roofhooks for all roofings The roof hooks are made of extremely resilient, yet at the same time light aluminium diecast. Due to their design, the roof hooks are especially rigid and stable. The rails that then fasten the modules in place with module clamps are mounted on these hooks.

RENVARBRSLT - Renusol Variosole roof hook for slate tiles

VarioSole at a glance Removing of the roofing not required Suited for all roofing types Few system components Patented height adjustable Moduleclamps Ideally suited for levelling height irregularities Preassembled mounting components The flexible and light on-roof system for pitched roofs The VarioSole is suited for all roofing types, all current PV modules and, thanks to height-adjustable mounting elements, even for roof areas that are not level. The installation of the few, partially already pre-assembled components is easy and fast. VarioSole is a rail system that is mounted on the rafters with special roof hooks. All that is usually necessary for the installation is to remove or slide up single tiles. Removing the entire roof covering is therefore not required. Roofhooks for all roofings The roof hooks are made of extremely resilient, yet at the same time light aluminium diecast. Due to their design, the roof hooks are especially rigid and stable. The rails that then fasten the modules in place with module clamps are mounted on these hooks.

RENVARBRTILENL - Renusol Variosole roof hook stainless steel

VarioSole at a glance Removing of the roofing not required Suited for all roofing types Few system components Patented height adjustable Moduleclamps Ideally suited for levelling height irregularities Preassembled mounting components The flexible and light on-roof system for pitched roofs The VarioSole is suited for all roofing types, all current PV modules and, thanks to height-adjustable mounting elements, even for roof areas that are not level. The installation of the few, partially already pre-assembled components is easy and fast. VarioSole is a rail system that is mounted on the rafters with special roof hooks. All that is usually necessary for the installation is to remove or slide up single tiles. Removing the entire roof covering is therefore not required. Roofhooks for all roofings The roof hooks are made of extremely resilient, yet at the same time light aluminium diecast. Due to their design, the roof hooks are especially rigid and stable. The rails that then fasten the modules in place with module clamps are mounted on these hooks.

RENVARBRTILE - Renusol Variosole roof hook aluminium

VarioSole at a glance Removing of the roofing not required Suited for all roofing types Few system components Patented height adjustable Moduleclamps Ideally suited for levelling height irregularities Preassembled mounting components The flexible and light on-roof system for pitched roofs The VarioSole is suited for all roofing types, all current PV modules and, thanks to height-adjustable mounting elements, even for roof areas that are not level. The installation of the few, partially already pre-assembled components is easy and fast. VarioSole is a rail system that is mounted on the rafters with special roof hooks. All that is usually necessary for the installation is to remove or slide up single tiles. Removing the entire roof covering is therefore not required. Roofhooks for all roofings The roof hooks are made of extremely resilient, yet at the same time light aluminium diecast. Due to their design, the roof hooks are especially rigid and stable. The rails that then fasten the modules in place with module clamps are mounted on these hooks.

RENVARBRTILE - Renusol Variosole roof hook aluminium

VarioSole at a glance Removing of the roofing not required Suited for all roofing types Few system components Patented height adjustable Moduleclamps Ideally suited for levelling height irregularities Preassembled mounting components The flexible and light on-roof system for pitched roofs The VarioSole is suited for all roofing types, all current PV modules and, thanks to height-adjustable mounting elements, even for roof areas that are not level. The installation of the few, partially already pre-assembled components is easy and fast. VarioSole is a rail system that is mounted on the rafters with special roof hooks. All that is usually necessary for the installation is to remove or slide up single tiles. Removing the entire roof covering is therefore not required. Roofhooks for all roofings The roof hooks are made of extremely resilient, yet at the same time light aluminium diecast. Due to their design, the roof hooks are especially rigid and stable. The rails that then fasten the modules in place with module clamps are mounted on these hooks.

RENVARBRTILETR - Renusol Variosole Roof hook stainless steel Tegola Romana

VarioSole at a glance Removing of the roofing not required Suited for all roofing types Few system components Patented height adjustable Moduleclamps Ideally suited for levelling height irregularities Preassembled mounting components The flexible and light on-roof system for pitched roofs The VarioSole is suited for all roofing types, all current PV modules and, thanks to height-adjustable mounting elements, even for roof areas that are not level. The installation of the few, partially already pre-assembled components is easy and fast. VarioSole is a rail system that is mounted on the rafters with special roof hooks. All that is usually necessary for the installation is to remove or slide up single tiles. Removing the entire roof covering is therefore not required. Roofhooks for all roofings The roof hooks are made of extremely resilient, yet at the same time light aluminium diecast. Due to their design, the roof hooks are especially rigid and stable. The rails that then fasten the modules in place with module clamps are mounted on these hooks.